-
__Steps to reproduce:__
List the minimal actions needed to reproduce the behavior.
1. sudo systemctl start influxdb
__Expected behavior:__
Service to start
__Actual behavior:__
Service…
-
1\. Default SSH password set using userconf file in /boot
2\. After running init_resize I then ran firstboot but with the do_resize part commented out
Building on: https://github.com/openenergymo…
-
**Describe the bug**
I tried to take a JPEG image on Pi Zero + Camera v1.3, but there are pixels wide stripe on the right side.
**To reproduce**
```bash
WIDTH=1280
HEIGHT=720
v4l2-ctl --set-fm…
-
Hi and hello to everyone as this is my first post in this project.
I have a clean installation on Raspberry Pi 3+ with Raspbian Stretch. I follow Install-On-Raspbian guide with no problems. Camera,…
-
```
$ make
make ARCH=arm CROSS_COMPILE= -C /lib/modules/6.1.21-v8+/build M=/home/pi/RTL8811CU_for_Raspbian modules
make[1]: Entering directory '/home/pi/linux-0afb5e98488aed7017b9bf321b575d0177feb…
-
Hello,
tried to use this HACS integration and failed to make it works because of this error :
https://forums.raspberrypi.com/viewtopic.php?t=361218
I think it could be interesting to create a…
-
I get this output:
` Error [ERR_STREAM_DESTROYED]: Cannot call write after a stream was destroyed
Feb 11 20:22:10 raspberrypi homebridge[4435]: at doWrite (_stream_writable.js:411:19)
Feb 11 20…
-
The [Getting started wiht Raspberry Pi Pico-series](https://datasheets.raspberrypi.com/pico/getting-started-with-pico.pdf) contains inconsistencies regarding the default `PICO_BOARD=` build provided b…
-
Quick question, How can I build/integrate this project into raspberrypi os? My idea is to have my phone on trips... but also have a "desktop" (rpi4) in my car that I could plug in for Jellyfin to stre…
-
### Describe the bug
I have a Raspberry Pi 3B+ where I want to have the rootfs on an external USB drive that is powered by its own power supply.
I can use the rootfs from the external USB drive, b…