-
The extruder autofan feature does not compile if motherboard is set to BOARD_RAMPS_13_EFB (33).
-
Servo was working with 1.0.2
With RCBugFix I just get "Servo out of range" from Repetier Host with M280 no matter what angle I try.
(Have not tried RC, just the BugFix)
Far as I can tell I've duplic…
-
Downloaded bug-fixing branch on 21.12.2014
Set the following to reprodice the error:
# define MOTHERBOARD BOARD_RAMPS_13_EFB
# define RA_CONTROL_PANEL
# define BABYSTEPPING
Get the error:
ultralcd.cp…
-
Enabling either SDSUPPORT or any of the LCD panels with SD support now fails to compile. The IDE reports that LONG_FILENAME_LENGTH is not declared. It seems SdFile.h is missing. From a fresh clone, th…
-
root@xiong:~# ehforwarderbot
Traceback (most recent call last):
File "/usr/local/bin/ehforwarderbot", line 8, in
sys.exit(main())
File "/usr/local/python3/lib/python3.8/site-packages/ehfo…
FoKit updated
2 years ago
-
**Given** I'm a new user hoping to configure marlin
**When** I'm reading [the configuring and compilation docs ](http://reprap.org/wiki/Marlin#Configuring_and_compilation)
**Then** I expect to see
…
-
If I enable it:
- extrude commands do nothing, return "ok"
- retraction commands raise the Z axis o.O
- the extruder stepper stays disabled (I can turn it by hand easily)
The motherboard is MKS_BASE …
-
Hi, I have a MM2 with Taurino power and Ramps 1.4 for 24V from ReprapDiscount.
I upgrade Marlin with new version, and I have a problem with the D9 Fan, that worked fine with the older version.
Now wh…
-
Tested with Witbox printer, but might affect others.
If Marlin is compiled using Arduino IDE, the $MOTHERBOARD name is only defined in Configuration.h, which in Witbox's case would be:
# define MOTH…
-
**Describe the bug**
In the 787-8 the EFB show flap 10 but the plane has not flap 10, it goes from flap 5 to 15
![B788 - 2022-03-08 19 13 30](https://user-images.githubusercontent.com/101215086/1573…