-
> Once finished, you will find u-boot.bin, zImage, and rootfs.tar.gz in buildroot/output/images you can now flash these to your SD card.
How to flash it - in one boot partition, in two partition (o…
-
See app/components/flash_card_component.html.erb (demo is available on /components)
-
The nanopi-r1 provides every boot a different MAC address.
Reproduction:
Build mtda for nanopi-r1
Flash the card
Boot
Login -> readout ip addr
Power off/on
Login -> readout ip addr
-
Hi,
I've got the S6 2.0, running Klipper with an RPi3B.
A couple of weeks ago Klipper was updated and I needed to update the firmware. It's a procedure I've done previously but since I don't do …
-
# An app that helps you study...
I would like to create a flash card app/ study tool app like this one https://www.studyblue.com
You can create digital flashcards and use them to study and subject o…
-
I am trying to set up a few cams for behavioral experiments and do not see the .bashrc file described in the video/manuscript under "remote control configuration". I working from an M1 Mac, have tried…
-
**Describe the bug**
when you open a sublime and type some words then stop recording
watch the recorded video and you'll see flash badly when you type
**To Reproduce**
Steps to reproduce the beh…
-
```
What steps will reproduce the problem?
1.connect via usb with vista
2.wait for vista to try to scan and fix the sd card OR write something to
the card
3.taskbar notification for preparing sd card…
-
i went ahead and flashed with the spacecraft-nx and everything went well, though the flashing process after doing the install didn't take as long as many people have said.. This took literally second…
-
TLDR; "MineConfig.cfg" file causes startup Guru Meditation error after saving settings. Deleting the file solves the problem but resets settings. How to fix? :>
Hey there! I'm getting a "Guru Medit…