-
Just finished installing TMC2130's following this guide: https://toms3d.org/2017/12/09/tmc2130-guide/
I have double and triple checked that my wiring matches the attached pictures (in the zip).
…
-
Hey Guys!
I need a little help! Today I replaced the old motors and the old stepper drivers too.
Now I use 2 TMC 2130 (X,Y axis) and 3 TMC2208 stepstcks (Z, Z2, E axis), and the machine is super s…
-
Hello
I do not know whats wrong but the lates versions i have found problems with the firmware.
POWER SUPPLY =0 Compiles and work
POWERT SUPPLY =1 or 2 compiles but It gets frozen and the LCD …
-
### Bug Description
Upgraded from 1.1.9 to 2.2.0 and everything seems to be working except for bilinear bed leveling which seems completely broken.
When I issue a G29, nozzle goes to the corner …
-
Hi,
Thank you for adding PINDA 2 functionality. Is there a way to add Linear Advance 1.5 also? I think it would complete this firmware.
-
Hello,
I have a problem which has been dealt with here before. I can't get the second Z-Stepper motor to the E1 on the Trigorilla_13 board. Every time I get the error: exit status 1
#error "No E ste…
-
All right guys here's a weird one. With the latest 2.x version my tmc2130 somehow doesn't get enabled when printing. The weird part is I can manually move it and it works fine for homing and g29 ubl. …
-
So i got updated to bugfix 2 yesterday
there must be a new setting somewhere i missed that monitors the endstops during print
since i use the pinda probe on my mendel90 with mk42 bed this one is…
-
I installed BLtouch on my homemade printer with Marlin 1.1.9 recently and it doesn't compensate the bed leveling. Before I installed BLtouch, the bed limit switch for Z axis seems to work perfectly wi…
-
### I need help on my 3d Printer, the bed size is 400,400 but i only try to use 330 by 300 but when i do the bilinear auto bed leveling it would say probing failed at the 7th probe, i tried reduci…