-
So I got this error while trying to install the requirements, not sure what to do.
My specs are
PI4 4Gb with bookworm
pi@raspberrypi:~ $ cd probe_accuracy_tests/
pi@raspberrypi:~/probe_accuracy_…
-
Couple of build issues when building for this target.
I've added the following to allow the builds to get started
```diff
diff --git a/components/mitsubishi_heatpump/climate.py b/components/mitsu…
sfozz updated
2 weeks ago
-
syslog:May 24 10:02:38 raspberrypi systemd[1]: bluetooth.service: Service has more than one ExecStart= setting, which is only allowed for Type=oneshot services. Refusing.
syslog:May 24 10:02:38 raspb…
-
After this install i can not connect via vnc
-
It seems that an actual bluez stack forces parasite-scanner to crash.
pi@raspberrypi:~/parasite-scanner$ ./parasite-scanner -config example_config.yaml
panic: unable to initialize the BLE stack: M…
-
Hello!
I'm running homebridge on a Raspbian and I have an AppleTV 4k. My config file is as follow:
```
{
"platform": "DACP",
"devices": [
{
…
-
pi@raspberrypi:/RaspberryPi/Multi_Camera_Adapter/Multi_Adapter_Board_4Channel/Multi_Camera_Adapter_V2.1_C++ $ sudo ./init_camera.sh
----Test i2c1
0 1 2 3 4 5 6 7 8 9 a b c d e f
…
-
I get this error
```
Error: cec-client never reported ready
Dec 24 17:48:59 raspberrypi homebridge[613]: at Timeout._onTimeout (/usr/lib/node_modules/homebridge-platform-cec/node_modules/cec-prom…
-
Hi,
i have problem with my ArduCAM. I connect with RaspberryPi and level voltage in SPI is higher than 3 V. When camera is connect with RaspberryPi in SPI pin is 3V3 but when I started program this l…
-
# 📖 Abstract:
- ✅ Linksys WiFi6 路由器 `AX5300`, 刷 `OpenWrt`. (路由器翻墙)
# 💯 Related:
- ✅ #86
- ✅ #190
> 树莓派:
- ✅ https://github.com/hhstore/blog/labels/RaspberryPi
- ✅ #165
- ✅ #184
…