-
Hi,
i have problem with my ArduCAM. I connect with RaspberryPi and level voltage in SPI is higher than 3 V. When camera is connect with RaspberryPi in SPI pin is 3V3 but when I started program this l…
-
# 📖 Abstract:
- ✅ Linksys WiFi6 路由器 `AX5300`, 刷 `OpenWrt`. (路由器翻墙)
# 💯 Related:
- ✅ #86
- ✅ #190
> 树莓派:
- ✅ https://github.com/hhstore/blog/labels/RaspberryPi
- ✅ #165
- ✅ #184
…
-
First of all, thank you for the amazing work. I've been running motionEye for a while and as I got myself a new SD card to do a fresh install of Raspberry Pi OS, I decided to give the active developme…
-
**Describe the bug**
The battery indicator incorrectly shows 100%
The RC indicator in QGC does not light up
**To Reproduce**
Steps to reproduce the behavior:
Build 1.11.0 PX4 on Ubuntu 20, use …
-
MaxIDE runs great on the Pi4/latest Raspbian, but the editor scrollbars are cut off for me, and almost inaccessible (see bottom/right):
![scrollbars](https://user-images.githubusercontent.com/17815…
-
I've been testing for a few days and can conclude that the VL805 does not like USB MIDI devices getting unplugged. It may reset the entire USB bus. This means that mass storage devices are unmounted a…
-
Thank you for reporting an issue with **AlexaPi**.
Make sure you are running the latest version of **AlexaPi**, and look through [issues](https://github.com/alexa-pi/AlexaPi/issues?utf8=%E2%9C%93&q…
-
When selecting Device manager tab in indiwebmanager web interface, Local Drivers dropdown does not contain HQ Camera.
I was using following procedure:
- sudo apt-get install indi-rpicam
- Rebooti…
-
Bonjour,
Je ne parviens pas a lancer issdomo automatiquement au demarrage de mon raspberry pi 3.
La precedure d'installation s'est correctement deroulee!
Voici ce que dit status:
i@raspberry…
-
Hi,
I am trying to get ino working on a RaspberryPI using Arch and Arduino 1.6.0. I have installed ino using pip2. I am getting the following error:
Searching for Board description file (boards.txt)…