-
There is a need to make a software UART speed converter. Configured GPRS and LORA-868MHz modules with an operating speed of 9600 bit/s are connected to the ESP32 microcontroller. The initial speed of …
-
I am experiencing problems in receiving with the Arduino R4 Minima board, while the same sketch loaded on Arduino Uno R3 works correctly; specifically, the data coming in is not consistent. In transmi…
-
Please consider building and releasing a Z-Stack 3.0.x (Zigbee 3.0) firmware for CC2530 based DIYRuZ Flower Plant Watering Sensor.
FYI, kirovilya from DIYRUZ community have backported Z-Stack 3.0 (…
-
I have 2 E220's set up with an esp32 and an esp8266(-01) respectively.
I connected the modules as follows:
E220esp32M021M119TX16 (PullUP 4,7KΩ)RX17 (PullUP 4,7KΩ)AUXPIN 15 (PullUP 4,7KΩ)VCC 3.3v…
-
My system works with E220-400M22S and E220-400MM22S on various controllers like STM32F7, ESP32 with LoRaRF Arduino library.
I am able to receive and transmitt.
Trying to make it work with RPi with n…
-
Hello there, could someone please help me to connect and give me a code example?
i have my esp-wroom-32 and my 8pin cc1101 (EO7-M11010) and i want it to receive 433.92 mhz signals
i tried every sing…
-
### Problem description
I purchased a device from EBYTE which should convert RS485 registers to Homeassistant.
Registers are read and write with function 03 and 10
Want to use this device to connec…
-
### Is your feature request related to a problem? Please describe.
It would be nice to get RF rssi in db (not sure of the right name).
It could help to see if the position (distance) of the card it …
-
Hello! I’m developing a new board for Meshtastic based on Nrf52840 and ebyte e22900m22s (sx1262). I got the first prototypes built and successfully compiled and flashed the adafruit bootloader. I’m no…
-
Hello?
It's been a while.
I've been using E32 well, with your code making it easy.
I'm logging an issue because there's an implementation I'm using that doesn't make sense to me personally, and I…