-
### Is your feature request related to a problem?
Using Cura 5.0.0
I am printing a high and a narrow object (a bolt). The high speed at which the slicer codes the ender3v2 does not let the PLA c…
-
### Cura Version
5.9.0 Beta
### Operating System
Windows 10
### Printer
Ender 3v2 Klipper
### Reproduction steps
1. Load a default draft profile
2. Enable "Outer wall wipe distan…
-
### Cura Version
5.9.0-beta.1
### Operating System
Linux
### Printer
Creality Ender 3v2
### Reproduction steps
Add a simple cylinder, activate Spiralize Outer Contour on a generic profile, slic…
-
Hello,
I have a MK2.3 and a MK3 Prusa printer. The 'U1' argument for the M303 does not appear to be implemented for these printers. as a result the new PID values determined by this plugin are not …
-
### Cura Version
5,8,1
### Operating System
Windows 11
### Printer
Ender 3v2 neo
### Reproduction steps
Qualquer Arquivo persiste no mesmo erra ja contatei o suporte aqui e me disseram que est…
-
https://github.com/user-attachments/assets/08d6a4e1-fdea-4a54-aac8-9a8d3bc46b8a
https://github.com/user-attachments/assets/1092bfb8-85d3-4885-988d-ed3368de2637
![IMG_20241105_182340](https…
-
When i opened pronterface and connected my printer via usb cable I got a bluescreen and now i can't open the program. Reinstalling didn't help.
Version: 2.1.0 x64
Printer: Ender 3v2 Creality 4.2…
-
Am I wrong to think that this thing will work on a 4.2.2 board? For the life of me cant get this to work and my searches are not getting good results.
-
Worked fine on an Ender 3 S1 stock firmware 1.0.3C but the bed measurements need to be adjusted to:
x 10 - y 25
x 20 - y 179
x 179 - y 179
x 179 - y 25
I think the probe points (hence the x10…
-
I am in despair and scream very loudly, but kindly, for help!
I have been studying Ellis page for about 5 days. Have Superslicer also set very well. The pages look great and my understanding has gr…