-
#### What were you doing?
#### What did you expect to happen?
A static address to be assigned to my pi on reboot
#### What happened instead?
No Ip address was assigned
#### Was there …
-
Hi there,
DHCP is reliable when I connect it directly to the router (DHCP server), however when i connect to via various switches it fails.
At work, with enterprise switches that are daisy chained, …
-
# Required information
* Distribution: Ubuntu / debian
* Distribution version: tested on Ubuntu 17.10 an debian stretch 9.3
* The output of
* `lxc-start --version`: `2.1.0`
* `lxc-che…
-
----------------------------- Remove above -----------------------------
### Basic Infos
#### Hardware
Hardware: ESP-12E
Core Version: 2.4.0-rc1
### Description
The DHCP Transactio…
ghost updated
6 years ago
-
like in line 154 ff it is tried to make a static ip configuration out of an IP-addr. which is in the DHCP-server IP-pool and so under it's authority and NOT meant to be used in static configurations.
…
-
**In raising this issue, I confirm the following:** `{please fill the checkboxes, e.g: [X]}`
- [x] I have read and understood the [contributors guide](https://github.com/pi-hole/pi-hole/blob/master…
-
in config vars
gui_static_wan_gateway: "10.100.0.1"
gui_desired_network_role: "Appliance"
gui_static_wan_ip: "10.100.0.170"
gui_static_wan_nameserver: "10.100.0.1"
gui_static_wan_netmask: "255.25…
-
We've experienced and reported the same issue with NodeMCU based on non-OS SDK in the past. It appears to be still present in the IDF's dhcpserver.
#### Problem description
When the firmware is in…
-
raspbian-9-lite of 8/16:
**Added wipi and ethernet dongles**
**ip a**
```
1: lo: mtu 65536 qdisc noqueue state UNKNOWN group default qlen 1
link/loopback 00:00:00:00:00:00 brd 00:00:00:00:…
-
Be aware of the broadcast flag, see RFC2131 (page 24):
> A client that cannot receive unicast IP datagrams until its protocol software has been
> configured with an IP address SHOULD set the BROAD…