-
I haven't had any luck finding a micro-usb connector to solder onto the main board so I can gain access to the RS-232 interface. Checked Mouser and Digikey extensively. Does anyone know what part numb…
-
Hi!
I just found your repo after trying to google a bunch of sony URLs and other things.
I'm also trying to change the voice files on my headset, because I really wish I could just quiet them or…
tux3 updated
2 months ago
-
Hi, Daniel,
I also tried it on Iskra AM550, but I only got some garbage data via serial port (looks like "⸮⸮ ⸮ ⸮ ⸮ ⸮⸮⸮ ⸮ ⸮ ⸮⸮⸮ ⸮ ⸮⸮ ⸮ ⸮ ⸮⸮⸮ ⸮ ⸮ ⸮⸮").
In general it's wor…
-
Hello, your welding machine is very beautiful, I'd like to organize a, but I can't compile the firmware, can you source generated HEX file, it's easy burn firmware, if can do this, thank you very much…
-
Due to living in a 220V area, I have replaced my PSU on PS1 with an open source PSU called "PS1 picopsu"（Purchase from merchants），It also supports the "soft reset" function, simply connect the handle …
-
Good Morning, I just finished assembling the module (rev2). I uploaded the Radio_Music_2017.2.hex file onto the teensy 3.2. I used a brand new, out of the package, SanDisk Ultra 32GB microSD card. On …
-
it seems that my programmer ca not communicate with the fpga chip. getting a failed to scan board. soldered good. tried to flash anyway and get failed to verfy ID (expected 0x01299043 Read: 0x000…
b0y80 updated
3 years ago
-
Dears,
Since I am not competent to solder SMTs I have take a quote for 5x ZigUp assembled by supplier.
The ticket price is $80 by item +shipping cost from France.
Just let me know if you are intere…
kds69 updated
3 years ago
-
### Objective
I've wanted a weather station since I can remember and whilst we have been locked up socially distancing during the COVID-19 pandemic I decided to make this a reality. This was mainly d…
-
This isn't _necessarily_ an issue, but for lack of a better place to discuss, I'll ask here: the LimeSDR is advertised with a working frequency range from 100kHz to 3.8GHz, but the schematic notes on …