-
idf version used v4.1-dev-1931-g68be5f6ca and additional eclipse last plugins provided by vendor.
debug interface interface jlink openocd version: v0.10.0-esp32-20190313 (the most stable version for …
-
Hello,
I am trying to get this to work with my ESP-Wrover Module but does not seem to work. Please help.
https://www.amazon.com.au/Freenove-ESP32-WROVER-Bluetooth-Compatible-Tutorials/dp/B09BC5CN…
-
Hi
I have developed an application in which I have to store data in file for that I used Spiffs file system.
**Development Environment:**
Development Kit: ESP32-DEVKITV1
Module: ESP32-WROOM-32D
…
-
Hi,
trying [Calibrated_sensor_output.ino](https://github.com/LiquidCGS/FastIMU/blob/main/examples/Calibrated_sensor_output/Calibrated_sensor_output.ino) with an esp32 and an MPU6886
MPU6886::calib…
-
## ESP32 S3 with camera OV5640
//WROVER-KIT PIN Map
#define CAM_PIN_PWDN -1 //power down is not used
#define CAM_PIN_RESET -1 //software reset will be performed
#define CAM_PIN_XCLK 15…
grasp updated
1 month ago
-
The ESP WROVER Kit is not working with using Arduino IDE give guidance to solve the issue @VojtechBartoska
-
### The problem
Hello everybody,
recently I changed from ESPEasy to ESPHome due a migration to Homeassistant. I have to ESP32 with a TSL2561 to measure my outside brightness. Since the first OTA…
-
Module intéressant pour les modus du python, mais pas pin-compatible avec le module actuellement prévu. A vérifier si on peut combiner les 2 modules.
https://www.banggood.com/Geekworm-ESP32-WORVER-…
rolfz updated
5 years ago
-
## Environment
- Development Kit: [none]
- Kit version (for WroverKit/PicoKit/DevKitC): [none]
- Module or chip used: [ESP32-WROVER-E]
- IDF version (run git describe --tags to find it): v4.0.1
…
ghost updated
11 months ago
-
### The problem
I am using the `remote_receiver` component with a 433MHz receiver connected to an ESP32 board. At times (I suppose deppending on the conditions of the 433MHz spectrum) I get several …