-
Rocky and Bullwinkle rab_320 mostly good but glitches in transitions and some scenes with a lot of action.
Example, at skill shot bullwinkles antlers turn from yellow (correct) to cyan (incorrect)
v…
-
CFTBL colors wrong some scenes pal/vni 2.2.1-SNAPSHOT-r12 (5baf7ae) (x64)
Lots of green where there should be black or gray (filmstrip)
Some scenes go totally gray scale. Same in 32 bit.
[cftbl_l4.…
-
To help us resolve your issue as quickly as possible, please follow these guidelines when submitting an issue. Providing all the necessary information will save both your time and ours.
### Describ…
-
on 128x32 oled driven by ssd1306, the font of 'show string' is too narrow. 128x64 is ok.
-
Hello,
I am building BLE Gamepad with 0.9 inch OLED display on ESP32 DEVKITC V4 WROOM-32U, I use macOS for development.
Everything works on macOS, I can test all buttons using "Controller Lite" a…
-
The used [OLED display](https://www.lcsc.com/product-detail/_Shenzhen-Allvision-Tech-_C5123562.html) uses the [SSD1312](https://www.buydisplay.com/download/ic/SSD1312_Datasheet.pdf).
This controller …
-
**Describe the bug**
Hi, I am working on a Raspberry Pi Pico connected to a ssd1306 based o-led display: https://www.adafruit.com/product/938
I used `zephyr/boards/shields/ssd1306/ssd1306_128x32.o…
-
Wanted to verify the intention/state with you guys @freezy and @lucky01:
When I run latest 2.2 beta 2 with --colorize I can see from the logging it is looking for serum and pal/vni files in the ex…
-
By accident (resp. stupidity) I bought a FDD-UDD U144K.
Looks quit similar, but it's not obvious how the jumpers have to be connected to flash a new firmware. It has got a 7x2 pin header labeled J…
-
How to change the OLED resolution? I've got a 128x32 Monochrome OLED (https://www.adafruit.com/product/3527).
It is working fine on Adafruit 2IC type, but the lines are squizzed.