-
I'm using Linux Mint 19 on one of my laptop (X1C6) and after going through all steps and uninstalling thermald, laptop hangs spontaneous during first 2-3 mins after starting, deinstalling throttling f…
-
### Symptom data
1. Does the problem occur on battery or AC or both?
- Under Both Modes, but i am defaulting to BAT any ways.
2. Attach the *full* output of `tlp-stat` via https://gist.github.com…
-
Is it possible to access the I2C Interfaces that control the Voltage Regulator through the i2c-dev interface ?
this should return the ID of the installed VRM on a sapphire nitro+ (43)
let a=0; wh…
-
So, I have been mining stable in my 1080 ti aorus xtreme 11gb now for 3 months with ethenlargementpill, and af setting power = 65% clock = +100 mem = +750 no crashes eth 54mh/s on multipoolminer all o…
-
Finally my Bluetooth is working fine and I have my Magic Mouse 2 works but I don’t have the handoff and continuity feature in the settings , why is that? I’m using a 4.0 Bluetooth dongle that was reco…
-
I have an RX 580 and an RX Vega 64. Note that the Vega 64 is overclocked by undervolting. I get this message when using cryptonightv7:
"[09:59:33] !Rejected by pool! Reason: Low difficulty share"
…
-
ROCm 1.9.1, Ubuntu 18.10, Vega64.
I enable PP with
GRUB_CMDLINE_LINUX_DEFAULT="amdgpu.ppfeaturemask=0xffffffff"
The "pp_od_clk_voltage" control file can be read correctly:
cat /sys/class/drm…
preda updated
5 years ago
-
Hello,
I want to share with you some information on how to overclock/undervolt GFX9 GPUs (Vega 56/Vega 64) under Ubuntu 16.04 and 18.04:
- Install updates:
```
sudo apt update && sudo apt dist-u…
-
Thanks for your work on this. I just wanted to let you know that it also works on laptops from other manufacturers, e.g. Dell XPS 9370 with the same cpu. Perhaps the documentation could be updated t…
-
Does the ```GPU``` setting in the conf still apply to the integrated GPU if have the MX150 installed?
Any other considerations for if I have the MX150 installed?