-
Hi Heikki,
Our LoRa APRS Gateway's are in there final stage, we added a band filter (1.7mhz wide) to increase the sensitivity of the modem.
https://github.com/Guru-RF/LoraAPRSGatewayWiFi
Our tra…
-
Hi, after starting the gateway, the following error appears after some time
"Unexpected HTTP response 202 for URL 'https://api.v2.sondehub.org/amateur/telemetry'"
But error.txt file contains err…
-
#### Summary
Add the below errors to the Gateway Troubleshooting documentation:
1. I get a `Failed to retrieve TCURI from CUPS: (404) Not Found` error in the physical gateway logs, which …
-
Hi
Thanks for sharing that fantastic project :) Do you plan to develop a LORA version ? It would make it even cheaper and lasts longer on a battery charge.
Thanks
Vincèn
-
Hi all,
I'm trying to run `lora_lorawan.rs ` example on a nucleo-wl55jc.
For the joining I use a `while let` statement but `device.join(...)` always fail and return a `RxTimeout` error.
On TTN…
-
Many users are uploading the wrong build for their hardware. File names for all hardware begin with openevse which is misleading. The following names are suggested to match the manufacture of hardware…
-
Hi all, I am sending data from a RFM98 (attached to an ESP32) to the other RFM98 attached to a Raspberry Pi 4b running LoRa gateway. The sending module is using [arduino-lora](https://github.com/sande…
-
Using the E5 dev board (https://www.seeedstudio.com/LoRa-E5-mini-STM32WLE5JC-p-4869.html), I can get chirpstack to recieve a JoinRequest and issue a JoinAccept however RadioLib provides a timeout erro…
-
Create description about your issue, and your actions to solve it.
I try to connect tb-gateway to nodered. i installed the aedes mqtt broker node and it does not work. then i noticed that aedes suppo…
-
Hi All,
I find this a bit annoying when developing with platformIO for ESP32 and Arduino.
I am using:
Ubuntu 20.04
VS Code with PlatformIO
ESP32
Task Upload Fails:
Error:
File "/hom…