-
Hi, First of all thank you so much for this tutorial. I followed all your steps but I am getting framerate of only 10 FPS. Can you please specify any reasons if possible. I am using RPI4B with 4GB ram…
-
Hello,
Thank you very much for this program. It is great.
I used it on my Rpi2 for WWVB/Marathon Clock and did not work (on 60kHz) until I overclocked it to 1GHz. After this fix it works perfectl…
-
**Describe the bug**
As I move the cursor back and forth from my desktop to the pi the pi's screen will flash a blank (black) screen for a second. Eventually it will fail to recover from this and si…
-
On the pi4, a core_freq value of 250 is ignored, because the only accepted options are 500 (default) or 600. The enable_uart=1 setting is a workaround, but I'm not sure I want to build that into the s…
-
**Describe the bug**
I'm indexing repositories and I'm getting 100% CPU useage and > 100° temps that end up slowing down and crashing the PC
**Expected behavior**
Indexing smoothly with no ex…
-
**Issue:** in BT37 the clock speed of my Odroid N2+ isn't proper shown, should be 2,4Ghz and now is around -10% (see attachment).
**Expected result:** I wan't to bee enable to use the max. performanc…
-
I found that rpi-fbcp is having some performance issues, so I replaced the one bundled in your image with the fbcp-ili9341 one found here: https://github.com/juj/fbcp-ili9341
The difference is nigh…
-
First off, a massive thank you for the repo-- truly a blessing. I very much appreciate your continued work on the project.
That said, while my system works great overall, i do have a couple problem…
-
Asking for some (advanced) conf options to tweak cycle counts like in libretro. Even typing in manual #s instead of presets would be great. And maybe an activation toggle to quickly go back to default…
ghost updated
6 years ago
-
> To join as a miner in a PoW network, you need to purchase mining hardware (often specialized hardware called "application-specific integrated circuits" or "ASICs"), have access to a cheap and reliab…