-
I'm having trouble getting the rngBridge to power up. My Renogy charge controller is pushing out 14.5V on the correct pins. With the buck converter plugged in, I don't see any activity on the rngBri…
-
I have finally begun with a REMOTE_AUTODETECT :-)
For now it will assume the six bldc pins to be
```
#define BLDC_GH PA10 // green
#define BLDC_GL PB15
#define BLDC_BH PA9 // blue
#defi…
-
Repurposing this issue for the discussion that it started. Was originally a question about connecting, and turned into a discussion about deciding the sensor data.
---
In the blog post, you ment…
-
The button on the front doesn't do anything when pressed or held. The light is on and blue but never changes to red no matter what state the pi is in. I ran the install script, I set the fan with the …
-
Hi.
I was wondering if you had made any comparison on these 3 chips, especially in terms of the magnetometer, which has been a big problem for me on the Invensense in terms of error.
-
I've been trying to enter the bootloader mode by holding the reset button or shorting the reset and ground pins, and by doing so while shorting or holding reset and connecting it to the computer (Wind…
-
## Current Behavior
INAV 7.1.2 fails to communicate with FrSky TD receivers over FBUS. I am using Speedybee F405 wing controller.
Same receiver works flawlessly over SBUS, of course without te…
-
Thanks for this project! I don't have an Aquarea yet, but am considering it, and one of the factors is the possibility to control it programmatically.
Do you happen to have done more reverse engine…
ariep updated
2 months ago
-
**Summary of problem**
I have 2 RATGDOs on similar Chamberlain GDOs. One works well, the other does not show the correct status of the GDO and hence does not control the opener correctly. They are wi…
-
**Have you looked for this feature in other issues and in the docs?**
**Is your feature request related to a problem? Please describe.**
_A clear and concise description of what the proble…