-
This beautiful library works fine with my ESPboy device www.espboy.com
Please add ESPboy to the "Currently Supported Dev Device"
**ESPboy (ESP8266 + ST7735 128x128) www.espboy.com**
```
#i…
-
发现自带的dynablocks不支持esp32下的1.8‘’TFT(st7735),不知能否增加,又或者本身是支持的,我接错了引脚。
-
To minimise effort to resolve issues the following should be provided as a minimum:
1. A description of the problem and the conditions that cause it to occur
i am attempting to combine two files (…
-
**Operating environment/Installation (Hass.io/Docker/pip/etc.):**
Standalone pip3 esphome 1.16.2
Standalone pip3 esphome 1.16.2
**ESP (ESP32/ESP8266, Board/Sonoff):**
ESP32, M5Stick-C
…
-
I am using the spi of stm32 mini to drive a st7735 screen, but I think it is too slow, so I did the following to enable dma,
`&spi1 {
pinctrl-0 = ;
status = "okay";
dmas = ,
;
…
-
Hi everyone,
After going through all threads and tutorials possible, I still can't find a solution to my problem. I try to run TFT_eSPI on ESP32 with 128x160 LCD display with ST7735s driver, but th…
-
Good morning,
I want to use the above mentioned board to play around with.
Waveshare provides a Micropython graphics example which works.
Their "C" example doesn't. I don't see any activity on th…
-
I have tested setup 7 and 47 and keep getting a with screen. I m not using the default wiring but I know it works by only using these librarys and pins
```
//#include
#include
#include
#in…
-
### The problem
Hi,
this is my first ever post on GitHub so please bear with me.
I am trying to use the ST7735 display bought from Aliexpress. here is the [link](https://www.aliexpress.com/ite…
-
```
// Config for the blue boards:
// front: 1.77' TFT 160(RGB)x128
// back: 1.77' TFT and two rows of pins; 8..1 and 9..11
//
// https://www.arthurwiz.com/software-development/177-inch-tft-lc…
dirkx updated
2 years ago