-
Missing support for newer versions of the IDF tools, e.g. 4.2 and 4.3 (although still not released)
Would be totally fine if the support means dropping the Arduino features, or this was broken into…
-
Hi, I tried modify existing devices for INMP441 but without success.
Below the code with my esp32cam. I see raw data on Mqtt Explorer, but remote wakeword is not recognised by Rhasspy. Any ideas?
…
-
The code can be downloaded onto a normal ESP32 board, but it will crash when it attempts to initialize the camera. It would be a nice feature to be able to build without camera support so the basic r…
-
**Using the environment**
Sloeber v4.3.3 (Zip package installation, path: E:\software\sloeber)
win7 64bit
target: ESP32 Arduino 1.0.4
**Step**
1. create workspaces on D:\ names "ESP32_Arduino_S…
-
**Describe the bug**
The default accesspoint password in `README.md` is incorrect.
It is stated as `espcam32#` but the actual password is `esp32cam#`
Suggest removing the "." afterwards too to …
-
In my case the picture is to bright, resulting in too much light being reflected by the
glass of the watermeter so part of the image is unclear.
The esp32cam demo firmware has the option to change t…
-
Uninstalled PIO, then deleted .platformio directory.
After the new installation of PIO I got the error when I created a project for AI-Thinker ESP32-CAM.
PIO Core Call Error: "The current working…
-
### Hardware:
Board: ESP32CAM
Core Installation version: 1.0.3
IDE name: Arduino IDE
Flash Frequency: 80 Mhz
PSRAM enabled: No
Upload Speed:…
-
Please add a new object transmitted via mqtt with the timestamp of the last checked value. Can be used to check if the esp32cam is still alive.
HJS72 updated
3 years ago
-
My esp32cam running rolling version installed yesterday connects to pool.ntp.org every second despite the fact that in the config file a local ntp server is defined by ip address.
My config:
[Ma…