-
### Board
ESP32-S2
### Device Description
Nano ESP32-S2 muse kit and waveshare ov2640
### Hardware Configuration
what is I2C pins?
### Version
v3.0.3
### IDE Name
Arduino iDE
### Operatin…
-
**Project description**
An app for Raspberry Pi GPIO Output control and Input visualization, built in rust using the [Iced](https://github.com/iced-rs) GUI toolkit and [rppal](https://github.com/go…
-
Since commit 502df79b860563d7 ("gpiolib: Warn on drivers still using static
gpiobase allocation"), one or more warnings are printed during boot on
systems where static allocation of GPIO base is use…
-
I believe the other [issue](https://github.com/gauteh/defmt-serial/issues/11) kind of mention that we would need to migrate this project to embedded-hal-1.0+ but this is more for people like me, tryin…
gbin updated
5 months ago
-
`make gpio_defaults` run on a caravel_user_project can incorrectly handle some Verilog constant/literal patterns in `verilog/rtl/user_defines.v` because it assumes a 4-character hex value.
```veril…
-
Problem: the raspi cooler is almost required for the pi5 which necessitates mounting a HAT+ with 15mm (16mm recommended) clearance per the [HAT+ spec](https://datasheets.raspberrypi.com/hat/hat-plus-s…
-
Hi this is a bit of a Noob Question but I am hoping that you can give me some direction on how to configure the matrix to run on SPI1 instead of SPI0
I have the same problem on both a Raspberry Pi3…
-
### Answers checklist.
- [X] I have read the documentation [ESP-IDF Programming Guide](https://docs.espressif.com/projects/esp-idf/en/latest/) and the issue is not addressed there.
- [X] I have updat…
-
Hi,
I was compiling the code on esp32-s3 OTG and I get these errors
how can they be fixed?
In file included from /home/mc/Arduino/libraries/ESP32-USB-Soft-Host/src/ESP32-USB-Soft-Host.h:5,
…
-
GPIO fields briefs are way too long. `(y=0..15)` and `These bits are ` (`written by software...`) are completely useless (the information is displayed on the field, so there is no point in indicating …