-
### Describe the issue you are experiencing
**the following error i have and gpio how work like binary sensor not working.**
2024-05-09 16:53:11.830 ERROR (MainThread) [homeassistant.component…
-
Hi there,
I recently found my old iPhone 3G with stuck in bootloop and wanted to reset it. During the normal process via Finder on macOS I receive this error:
"This iPhone was previously in DFU …
-
[Log] Placing device to pwnDFU mode using gaster
usb_timeout: 5
usb_abort_timeout_min: 0
[libusb] Waiting for the USB handle with VID: 0x5AC, PID: 0x1227
CPID: 0x8960
Found the USB handle.
Stage…
-
### Describe the issue you are experiencing
24-02-16 06:44:24 WARNING (MainThread) [supervisor.homeassistant.websocket] Connection is closed
24-02-16 06:44:28 WARNING (MainThread) [supervisor.homeas…
-
### Describe the issue you are experiencing
If I try to use `journalctl -p err` to look for errors on the OS, hardware, etc., I get a lot of lines from supervisor that are tagged `INFO`. This makes i…
-
**Introduction**
This issue relates to the privacy risk analysis done in the April 12 version of the white paper. Basically, I believe this analysis grossly under-estimates the risk that infected …
-
### Verification
- [X] I understand that [if I ignore these instructions, my issue may be closed without review](https://github.com/Homebrew/homebrew-cask/blob/master/doc/faq/closing_issues_without_r…
-
# Problem/Motivation
NUT fails to start.
## Expected behavior
NUT started and working
## Actual behavior
Fails to start
## Steps to reproduce
My devices configs:
```
devices:
…
-
After flashing the firmware with esp8266 flash tool, i can type command via the serial interface, but can't access the web. V1.6 is working good.
Here are some serial log:
Mounting SPIFFS...OK…
-
Hello,
I've hit a problem when using utf-8 passwords and hope you can clarify.
Passing unencoded/decoded utf-8 passwords to the process() method fails the length rule as the length is computed t…