-
Hi,
I have a strange behaviour: changing the order of some settings in a demo `TouchWakeUp.ino` included into Arduino ESP32 package, code fail.
### System
Board: ESP32 TTGO T-call
IDE name: Ar…
Leo-C updated
3 years ago
-
>### Hardware:
> Board: Adafruit HUZZAH32- ESP32 Feather
> Core Installation version: current git master
> IDE name: Arduino IDE
> Flash Frequency: 80Mhz
> Upload Speed: 921600
>Computer OS: Win…
-
### Basic Infos
I build an alarmclock with a 6-digit leddisplay with a TM1637 connected to my home system via MQTT.
I set the times and en/dis-able the alarms in NodeRed on my phone and send that vi…
-
Hello, I am having issues compiling TFT_eSPI on a [Lilygo T8 board](https://github.com/Xinyuan-LilyGO/LilyGo-T-Display-S2). I know that ESP32-S2 boards are not fully supported right now, but I was hop…
-
I wanted to use a LoRa Radio Node board with an 328 chip and OTA on the V3 stack. It uses the old LMIC library and joins, but does not transfer messages. Serial stops after:
LMIC-node
Device-id…
-
upload to Radiosondy and SondeHub does not work
Radiosondy here I entered the data from the account
Complete all fields at SondeHub
Do I need a GPS FIX?
-
Hello everyone!
I have successfully uploaded PedalinoMini to my TTGO T-Display, but the Web interface is not displayed correctly. I have tried in Chrome, Firefox, and Microsoft Edge. I have disable…
SD456 updated
3 years ago
-
Thanks for help up and contribute to CanAirIO project. Please edit and fill this template.
## Description
When I have the sensors in small sample rates, 5 to 30 seconds there are no disconnection …
-
Describe the issue
I cant use my Touch.
Code to reproduce the issue
I use the arduino esp port. And load the Library TFT_eSPI
the kallibration of the touch is working after that i init the lvgl …
-
Dear KaraWin, you can add a display with a resolution of 135x240 on the ST7789 SPI controller.
Such a display is used in the TTGO-T-Display module. I made the configuration, the display works, I set …