-
Hi,
I use the library with the Nano Ethernet Shield on an ESP32 Dev Kit-C.
I also use the PubSubClient-Library to send MQTT messages.
After some time (varies between some seconds and half an hour) …
-
### The problem
The camera is not detected. Tested same HW with demo Arduino sketch and it works, so not a HW issue.
I'm currently using an OV2640 camera that also works in ESP32Cam module running E…
-
```
I want to change PN10 because I need it for an ethershield. I tried to change
it in the config file but
this doesn't seem to work. If its on another pin than 10 the LEDs are
flickering and maki…
-
```
I want to change PN10 because I need it for an ethershield. I tried to change
it in the config file but
this doesn't seem to work. If its on another pin than 10 the LEDs are
flickering and maki…
-
```
I want to change PN10 because I need it for an ethershield. I tried to change
it in the config file but
this doesn't seem to work. If its on another pin than 10 the LEDs are
flickering and maki…
-
```
I want to change PN10 because I need it for an ethershield. I tried to change
it in the config file but
this doesn't seem to work. If its on another pin than 10 the LEDs are
flickering and maki…
-
Hi!
I was trying to update M4 core with this library using an Arduino GIGA and it seems that it doesn´t work for me, maybe I'm not doing it in the right way. I want to upload the following sketch (th…
-
```
When using agentuino with arduino 1.0.0 or 1.0.1, the example sketch will
compile, but SNMP does not work - it times out instead.
This appears to be due to changes in Ethernet and EthernetUdp. T…
-
### The problem
Hello,
I have an ESP POE from olimex on which ESPHome is running. Now I wanted to expand my smart home and bought more olimex ESPs. Unfortunately, I can not get them to run over Ethe…
-
_From @SurferTim on December 3, 2013 13:22_
The wifi shield library apparently uses only one socket, and that one poorly. The function below displays the state of each of the 4 sockets, and the port …