-
```
What steps will reproduce the problem?
1. Modify example to have debug printf before and after ins.init
2. Build and Upload
3. Check serial output, will get debug before ins.init but not after.
W…
-
```
What steps will reproduce the problem?
1. Modify example to have debug printf before and after ins.init
2. Build and Upload
3. Check serial output, will get debug before ins.init but not after.
W…
-
```
What steps will reproduce the problem?
1. Modify example to have debug printf before and after ins.init
2. Build and Upload
3. Check serial output, will get debug before ins.init but not after.
W…
-
```
What steps will reproduce the problem?
1. Modify example to have debug printf before and after ins.init
2. Build and Upload
3. Check serial output, will get debug before ins.init but not after.
W…
-
```
What steps will reproduce the problem?
1. Modify example to have debug printf before and after ins.init
2. Build and Upload
3. Check serial output, will get debug before ins.init but not after.
W…
-
```
What steps will reproduce the problem?
1. Modify example to have debug printf before and after ins.init
2. Build and Upload
3. Check serial output, will get debug before ins.init but not after.
W…
-
```
What steps will reproduce the problem?
1. Modify example to have debug printf before and after ins.init
2. Build and Upload
3. Check serial output, will get debug before ins.init but not after.
W…
-
https://github.com/ArduPilot/pymavlink/blob/4dac715e4e394714d0676fa6675ff89d2871f380/generator/mavgen_swift.py#L249-L257
This don't work for https://mavlink.io/en/messages/common.html#ATTITUDE_TARGET…
-
#### Issue details
Request: Editing all CHx_OPT in a compact drop down list.
My thought is that on the Config/tuning page of Mission Planner, there could be a "Aux Channels Setup" page (or simila…
-
```
What steps will reproduce the problem?
1. mkdir build && cd build && cmake .. -DBOARD=mega -DPORT=/dev/ttyUSB0
2. make ArduPlane-upload
What is the expected output? What do you see instead?
[ 98…