-
At some public chargers (particularly ones by Alfen), the car can communicate with the charging station to give details about it's SOC, this is shown on the charger display. Looking around the interne…
-
When no CTD is set (e.g. `AUTO_INVOICING_OFF`), `END_OF_TERM` cancellation means _now_: https://github.com/killbill/killbill/blob/578224dd23c73e47e9d7b661fdd890e8ad233f3e/subscription/src/main/java/or…
-
I have tracked the charging / discharging curves for 12 days and found, that discharging stops always to ~49V. and it is not going lower.
My settings:
![settings](https://user-images.githubuserconte…
-
The EVerest project has open hardware as well https://everest.github.io/nightly/hardware/pionix_belay_box.html which is available as a kit from Pionix. Pionix also sells the uMWC (https://shop.pionix.…
-
Hi, I’m trying to use your ble implementation (using the dev branch to have the « wake » command) with evcc and it is not working as expected when the car is asleep, which is most of the time in my ca…
-
**Box Model:**
RX300
**Coil setup:**
TFV8 w/ 10 Coil @ 0.13ohm.
I'm just writing to report a possible bug in the latest myevic firmware.
I have been using MyEvic on my RX series mods for a …
ghost updated
7 years ago
-
I have a setup with original hoverboard control board and battery and one sensor board connected to the right connector with RX/TX bridged to the left connector.
My right motor has two switched pha…
-
I've just experienced a BIOS write failure. [EDIT: the deck has become responsive again on its own about an hour and a half later and completed the BIOS installation.]
The deck was on stable channe…
-
I recently purchased Xiaomi Mi Robot X10 and used `Create channels for new/unsupported devices (MIOT protocol)` to successfully create a database file.
[test-dreame.vacuum.r2209-20240813-212109.txt…
-
Cohere was used as the large language model in the current version of project. As the technology has evolved in the buffer period between this and previous iteration it is imperative that the relevanc…