-
The new framework is released a day ago, but makes problems with ems-esp.
I tested a small change and it seems it does not work. It takes a while to realize that the new software was never started. …
-
Bonjour,
J'essai de compiler ESP32-PoolMaster sur un Olimex ESP32-EVB. La compilation échoue avec pluseurs erreurs concernant ADS1115 :
Library Manager: Installing ADS1115 @ 1.0.0
Warning! Coul…
-
Hallo, ich mache gerade einen "Stresstest" des Adapters. Leider läuft er nicht stabil. Ich habe über KNX eine Heizungssteuerung laufen. Welche per PID Regler und meine Vorlauftemperatur einstellt.
…
-
Hello, in your documentation, you wrote that it should work with Arduino board. I'm trying to use the HunterRoam library with Arduino Mega (for 5V) and Arduino Nano 33 IoT without success. Do you have…
-
### Answers checklist.
- [X] I have read the documentation [ESP-IDF Programming Guide](https://docs.espressif.com/projects/esp-idf/en/latest/) and the issue is not addressed there.
- [X] I have up…
-
Sometimes I need to cutdown normal nrf52 build by just few features currently removed now by `#ifndef SAVE_ON_FLASH`.
In other cases I want to start from SAVE_ON_FLASH configuration but want to add…
-
> Supported and tested Hardware
>
> embedded real life test
> setup: run test-example, use ds9490-master, arduino 1.8.3, Windows 10 and the board-library named in the brackets
Hi,
…
-
**Hardware (please complete the following information):**
- Lay-Z-Spa Miami S100101 (B-BWP05328)
- 6 wires
PCB details and wiring:
Display directly to the Wi-Fi module
- https://wiksi.biz/i/i…
-
-
Hello,
purpose of this issue is to cover problems related to migration from 2.X (at the moment of writing the latest version is 2.0.14) to 3.X version.
💥 **If you have any problems, please add c…