-
C:/Users/hansi/Desktop/esp-idf/iot/components/esp-si7021/si7021.c: In function 'si7021_init':
C:/Users/hansi/Desktop/esp-idf/iot/components/esp-si7021/si7021.c:39:6: error: 'i2c_config_t' {aka 'struc…
-
Please include the following information when submitting a bug report:
* The Pycom board you are using (e.g. WiPy 2.0, LoPy).
* The firmware version you are using. You can get it by executing the …
-
### Board
ESP32-S3
### Device Description
plain module
### Hardware Configuration
#define MCP2517_CS 10
#define MCP2517_MOSI 11
#define MCP2517_SCK 12
#define MCP2517_MISO 13
### Version
…
-
Hi, and thanks for sharing your work !
I was gifted a [Chinese copy of the EleksTube](https://www.ipstube.com/en/product/IPStube-401.html), and decided to see if I could reverse-engineer it. Doing …
-
### What happened?
On ESP32-S2, the CMT2300A and W5500 are not working when they run on `SPI3`.
### To Reproduce Bug
Configure a CMT and/or W5500 on an ESP32-S2 running OpenDTU version 24.9.2…
-
### Answers checklist.
- [X] I have read the documentation [ESP-IDF Programming Guide](https://docs.espressif.com/projects/esp-idf/en/latest/) and the issue is not addressed there.
- [X] I have updat…
-
I have problems in collecting the data
1. Im using window and I use the command 'idf.py monitor | findstr "CSI_DATA" > my-experiment-file.csv' but there is no output so Itried
2. idf.py monitor …
-
I was compiling the /inro/hardware-check project,but i met this issue:
error: failed to run custom build command for `esp-idf-sys v0.33.7`
Caused by:
process didn't exit successfully: `C:\Use…
-
### Answers checklist.
- [X] I have read the documentation [ESP-IDF Programming Guide](https://docs.espressif.com/projects/esp-idf/en/latest/) and the issue is not addressed there.
- [X] I have updat…
-
### Board
ESP32-C6
### Device Description
My own board
### Hardware Configuration
NO
### Version
v3.0.2
### IDE Name
ArduinoIDE
### Operating System
Windows
### Flash frequency
80
### PS…