-
-
I have been thinking about the issue of lack of spindle synchronization as it relates to lathe operation and I think I have an idea for smaller lathes t least. I have a 9 x 20 lathe that I also have …
109JB updated
3 years ago
-
I have two related issues:
1. I created a new venv and put `spherical-harmonics-basis` in my `requirements.txt`. The install went OK, but upon trying to `import spherical_harmonics` I received err…
-
Imported from SourceForge on 2024-07-05 08:40:43
Created by **[*anonymous](https://sourceforge.net/u/*anonymous/)** on 2011-01-04 17:34:34
Original: https://sourceforge.net/p/maxima/bugs/2122
---
At…
rtoy updated
4 months ago
-
Potentially because of access to a bad guitar, but seems like there's still a lot of noise in real world input. Consider some of these solutions to reduce noise:
Input Signal Analysis:
Print ou…
-
Hi
I have faced a serious problem, trying to build some new quads with modern hardware.
Had been tested such ESCc:
LittleBee 20A-S
LittleBee 30A-S
Aikon 30A-V2
Cikada 30A.
Several brands of m…
-
# Feature Request
Hello. I am looking for potential solutions for our problem. We need to be able to perform RF tests on 2.4Ghz antenna. One of the possible solutions is to use NanoVNA device.
…
-
when copying the original code
an important piece of code was lost in the procedure
`int32_t A4950_move(int32_t stepAngle, uint32_t mA)`
in file A4950.c
```
//scale sine result by current(mA)…
-
I use psi4 v1.7 to perform gradient calculations under the WB97M-D3BJ/DEF2-TZVPPD level. Most structures work fine, but I get the following error in some structures without a clear error message.
`…
njzjz updated
11 months ago
-
In order to account for the missing Und_min1x1_egm2008_isw=82_WGS84_TideFree.gz file in the CDN, we need to add a grid_alternative entry to point to the 1' geotiff file.
`('Und_min1x1_egm2008_isw=…