-
Hi,
Sometimes the program seems to be frozen , no record of photo and is not possible to get out from recording modus with the stop button from Trigger Control Panel , the only way is to reboot the R…
-
hi this is my problem:
`pi@raspberrypi:~/tg $ bin/telegram-cli
Telegram-cli version 1.4.1, Copyright (C) 2013-2015 Vitaly Valtman
Telegram-cli comes with ABSOLUTELY NO WARRANTY; for details type`show…
-
I am using omxplayer to play a 1080p h264 video on RPi Zero W, it works pretty good at the beginning. However, after playing for about 30~60 minutes, the screen will freeze. I think it is a system-wid…
44670 updated
5 years ago
-
after i installed patches on my pi3
i run
`iw phy `iw dev wlan0 info | gawk '/wiphy/ {printf "phy" $2}'` interface add mon0 type monitor`
but has error:
command failed: Connection timed out (-1…
-
I installed rpos on a Raspberry Pi and although it is discovered by the Dahua NVR, the video is not generated. After approximately 30 seconds, the NVR stops trying to access the Raspberry Pi camera m…
-
Implementers want uninterrupted installs (or at the very least, as streamlined and as rapid as possible).
Here are just a few such related issues — to unlock WYSIWIG rapid provisioning of Int…
holta updated
11 months ago
-
I don't know if the problem is on my raspberry pi, but after installation I can't access http://192.168.2.124:5050 or http://localhost:5050
-
Hi,
I have a weird problem and Github issues might not be the correct place to write this. Please forgive me and let me know where to write it in that case.
The problem:
I have a working NUT …
-
I'm just trying to run any test to see if the screen draws anything.
By simply running `pi@raspberrypi:~/Workspace/e-Paper/RaspberryPi&JetsonNano/python/examples $ python3 epd_7in5_test.py` I get all…
-
### The problem
After the latest update to 2023.6.4 (incorporating #4478) with usage of:
* display/waveshare_epaper/2.90inv2
* spi-bus
The module with configuration as included, after the update…