-
The interface required for developing a plugin in typescript is buried in the signalk-server package.
Steps to reproduce:
Create a separate plugin GitHub project, and implement typescript.
Whe…
-
Consider adding a "at sea" state to the plug-in.
Consider this simple js/node module with demo:
https://github.com/simonepri/is-sea
This module uses a highly compact (30-40K) series of global t…
-
Dear @amotl,
I'm glad that you did all the prework. I was able to use this project to connect my Calypso to my Signalk-Server / Openplotter-project.
The problem was, that the _angle_ was not stable …
-
I've ran the install.sh - but the driver won't start.
When i run
`root@einstein:~# svstat /service/dbus-mqtt-battery`
then i get
`/service/dbus-mqtt-battery: up (pid 2413) 1 seconds`
Log is em…
-
### Describe the bug
````
[ 14.719713] bcmgenet fd580000.ethernet: configuring instance for external RGMII (RX delay)
[ 14.722708] bcmgenet fd580000.ethernet eth0: Link is Down
[ 18.647145…
-
I have successfully gotten the plugin to respond to R requests, and publish SignalK data to my mqtt instance.
If it makes any difference, I am running OpenPlotter v3 on a pi4b4Gb.
I am now tryi…
-
Multiple reports
https://forum.openmarine.net/showthread.php?tid=4188&pid=23471#pid23471
https://github.com/bareboat-necessities/lysmarine_gen/discussions/211#discussioncomment-3409458
https:…
-
if I call the command from the shell return
pi@openplotter:~ $ sh -c "S_TIME_FORMAT=\'ISO\' mpstat -P ALL 5 1 | sed -n 4,8p"
19:00:59 all 0,75 0,00 0,50 0,05 0,00 0,10 0,0…
-
I am running an Openplotter installation with SignalK Node red plugin. When installing node-red-contrib-victron, it cannot connect to my MPPT and VSS. They are however visible in SignalK by the VE.Dir…
-
I'm using an RPI4 - 4GB with OpenPlotter. Data input to OCPN is SignalK. I've also tried using an NMEA0183 TCP input with the same result. Using a CAN/RS422 hat for input to the PI.
When I follow a…