-
**Application version**
Cura 4.3
**Platform**
Using Windows 10
**Printer**
Custom Machine
**Reproduction steps**
1. Downloaded Cura 4.3
2. Created a profile for my machine un…
-
Is anybody else seeing layer shifts on BugFix 2.0.0 ? I'm seeing one or two of them on long prints. I'm seeing them on the X-Axis (and mostly in the negative X direction).
I'm running an IDEX m…
-
#### Description
I have a NECS controller attached to the Raspberry Pi running CNCjs. I use it to home/jog/set W0,0 etc.
All of my current commands use a syntax similar to : `socket.emit('write'…
-
Hi, very new to all of this but I have an old 25W CO2 laser and the head movement electronics are toast but it still burns fine with 5KHz 5v PWM applied with a frequency generator.
I have a Mega+R…
-
I'm using the RDGLCD and from time to time I accidentally bump into the encoder after having exited the menu, thus changing the speed multiplier by a small percentage. It could be useful to add a "del…
-
#### Description
Hey all! I'm new to CNCjs but not new to building/retrofitting CNC machines with new controllers.
I've recently installed CNCjs on a Pi, and connected it to a G2 controller (spe…
-
Running smoothieware and 2 hotend thermistors.
tested failsafe to alarm when temp falls below 5 and tested at 10.
Both times it fails with message
-
#### Description
Describe the issue or feature request in detail. Take a screenshot or record a video will be helpful.
#### Versions
- CNCjs: 1.9.20
- Node.js: 6.x
- NPM: 5.x
#### How Do…
-
hey, I have a very specific question. We compiled the stock smoothieware with the make CNC=1 flag and impemented a new M command to show how long the Conveyer->queue length is. This allows us to send …
-
#### What were you doing?
1. In the panel menu go to Probe > Z Probe
2. Before the probing finishes, go back to the Watch screen.
#### What did you expect to happen?
Z probing to finish succes…