-
When I try and open the PIV Manager on macOS Sierra the application immediately crashes.
```
Process: pivman [869]
Path: /Applications/YubiKey PIV Manager.app/Conte…
-
After using CE 7.1 64bit for a while, I decided to upgrade to 7.5. After running the installation successfully I'm not able to open CE 64bit. When I double click it nothing happens.
However I'm ab…
-
Gave this a try and it compile and runs without much hassle.
Downloaded https://download.qt.io/archive/qt/5.4/5.4.2/qt-opensource-mac-x64-clang-5.4.2.dmg and installed it full with all addons (to mak…
-
Greetings to anyone that reads this message.
This Issue is where we coordinate and take bug report for the new 8821a in-kernel driver.
An effort is underway to add support for the rtl8821/11au c…
-
(1) 具体问题
A：H69k-max，rm520n-gl 5g网卡版本，使用istoreos（20231215版本），5g网卡最大速度只有不到250Mbps。
同样位置，同sim卡，使用wifi之路下载的“原厂”固件，能够达到正常的sim卡速度（黄金会员，500Mbps）
注意到istore os使用的5g modem协议是modem manager
而“原厂”固件使用的…
-
Is this compatible ?
I tried downloading tf_recovery.bin to sdcard and flashing. The file was renamed but nothing happened. I have yet to try with different SD card. Is there a procedure i could f…
-
After many hours in monitoring mode, the CPU in a Raspberry PI 3 goes to 100% of the load. The CPU load is produced by the tshark process. Do you have any ideas to solve?
-
Add enumeration and control/monitoring for expansion cards and slots such as the QM2 series which have EC controlled fans/LEDs/sensors.
CC: @calypso
-
Hi, I have an issue with the USB C from the board. When I boot my Xavier NX card with the board, I am not able to use a keyboard or a mouse. The card seems to boot normaly and I have the hdmi port whi…
-
**Describe the bug**
Openscad 2024-08-12 crashes on opening.
latest MacOs Sequoia Beta 15.0 24A5320a (updated today)
MAC warns about signature missing, but openscad crashes also after authoriza…