-
I'm in the process of provisioning my Pi3 with `raveberry`, and the installation is a little mundane. Is there a plan to host a `raveberry` image?
-
## Expected Behavior
The LED amber is off.
## Current Behavior
The LED amber is still on.
## Possible Solution
## Steps to Reproduce
1. set the VMD in the BIOS;
2. run lspci to get the …
-
Hey,
I used your hovercar variant, nice work.
But I have a problem with the calibration. I pressed the power button for ~5 seconds until the mainboard beeps. Then I pressed and released both pedals …
-
@Aircoookie I have used 4-relays to turn on/off 4 devices with your previous help. Added Alexa and MQTT modifications.
When I toggle LED strip the Relay2 (device3) also gets toggled through Alexa…
-
More of a question than an issue.
Rough estimate for power requirement:
- Raspi: 5VDC, approx. 1-2A
- LED strip: 5VDC, max. 3A (32LED/m * 1.5m * 60mA/LED)
- Stepper motors: 12VDC, max 2A
What's…
-
Hi Corsair & Co,
I have noticed the following issues controlling the **M800(C) mouse pad** (latest firmware v1.02.50) using the latest **CUE SDK v3.0.301** + the latest iCUE version 3.25.60, runnin…
-
The rPi Zero Power LED should be turned off.
Everything is explained here : https://www.jeffgeerling.com/blogs/jeff-geerling/controlling-pwr-act-leds-raspberry-pi
ghost updated
4 years ago
-
## Describe the question or issue you are having
Hi, I'm not able to receive events in HA after successful pairing in Phoscon. In developer tools deconz_event are not detected
## Screenshots
![…
ruabo updated
3 years ago
-
So I'm having some issues with the LEDStripControl plugin.
I've built a power control module for a LED strip, tested everything, and it works.
From the pi (as the pi user), I can execute "pigs p…
-
### PROBLEM DESCRIPTION
I Have built a ESP8266 WRGBW smart light..
It has a PIR motion Sensor, and also a LDR.
The template is set to
{"NAME":"FloodLight","GPIO":[255,255,255,255,46,47,2…