-
### Description of the setup:
* Device: STEMlab 125-14
* SD card image: prebuild Debian 9
* Other relevant information:
### Description of the problem:
Im trying to use a custom FPGA image…
-
I tried this out on the Pi, however I pushed it under a different account. Here it is: https://github.com/greatballoflazers/rpi-rgb-led-matrix (I did not want to be associated directly with that proje…
-
With the latest hart-software-services as of today (commit: 58b03943834fe34991dc5fa924436b3620e07aa5), the sdcard detection hangs always:
[1.939392] HSS_MMCInit(): Attempting to select SDCARD ... ▒…
-
So I hear a lot about a "cycle accurate C simulator" that is created for an architecture before the Verilog is written. This is apparently a home-grown C/C++ application that models the Verilog and ul…
-
Hi,
When following the step of the "Running on Zynq" tutorial, i download the Petalinux image ( xilinx-zcu102-dpu-v2021.1-v1.4.0.img.gz ) for
our target: ZCU-102 and could boot successful. But …
-
Hello,
I am unsure if to go directly with a CL (as this has been discussed already on golang-dev) or if to go through this issue first, apologies if I should have done otherwise.
On [this golang…
-
1. There's a bug in EDFA IF test where on_current is not defined. As per Grant, it is not necessary since the power check there is sufficient.
2. Noticed an FPGA read/write bug during the seed las…
-
With the production run of `r0.2` boards complete. I've got some ideas for adjusting the designs to improve the test workflow, and optimise the BOM (With the goal of reducing the total unit cost)
T…
-
While I know it does exist BigInteger sometimes it would be needed to have a type that is explicit 128 bit and nothing more probably it would be more efficient too (at least in a 64 bit machine at it …
fanoI updated
2 years ago
-
Hi, I'm trying to use VSCode along with this extension, st-util, and arm-none-eabi-gdb to debug my stm32 board.
But **every time I start the debug sesion, it won't stop at "main".** Instead, it wi…