-
```
The, current battery monitor only follows the battery powering arduino.
I think quite a few of us are using multiple powersources like 1x2S for
electronics and 1-2x3S for motors.
Battery monito…
-
I feel like I'm missing something. I'm using multiple sensors (JY901, WT901C, WT901BLE version). All of them read perfectly with standard Witmotion SDK and `witmotion-debug` tool from `pip`. But, when…
-
Hello
I am attempting to simulate a camera on the default drone with airsim that is as close as possible to a camera I want to use in real-life. However, I'm finding that the FOV functionality in a…
-
https://www.adafruit.com/product/1120
#7
-
```
What steps will reproduce the problem?
1. When I rotate the IMI parallel to the ground by 180 degrees the yaw angle
does not change by 180 degres=es
2.
3.
What is the expected output? What do yo…
-
E:\Tarun Karak\Energia\Energia_software\energia-1.8.7E21\libraries\SparkFun_9DoF_IMU_Breakout___ICM_20948___Arduino_Library-1.2.7\src/util/ICM_20948_DMP.h:548:17: error: expected unqualified-id before…
-
We should be able to manually set the direction of the ground station instead of using the IMU.
Maybe a dropdown with IMU, North, South, East, West?
-
The application note sheet says that that the LSM303DLHC sensor supports 400kbit speed, see if we can use this to speed up reading the sensor.
-
```
The, current battery monitor only follows the battery powering arduino.
I think quite a few of us are using multiple powersources like 1x2S for
electronics and 1-2x3S for motors.
Battery monito…
-
```
The, current battery monitor only follows the battery powering arduino.
I think quite a few of us are using multiple powersources like 1x2S for
electronics and 1-2x3S for motors.
Battery monito…