-
I'm using a CAN module which uses MCP2515 controller with an 8 MHz external oscillator and TJA1050 transceiver. If I set up the interface with
`sudo ip link set can0 up type can bitrate 1000000 `
t…
-
I'm using Raspberry Pi with MCP2515 connected to a network consisting of two [Delta servo drives](http://www.deltaww.com/Products/CategoryListT1.aspx?CID=060201&PID=23&hl=en-US&Name=ASDA-A2). I am try…
-
I have a question，
CAN bus just receive 8 Byte, this lib how to NMEA2000 message？
this class ActisenseReader ？
craig
-
Dear all,
I'm trying to make the "receive_check" CAN_BUS example working on my attiny1634.
What I did is to transform an UNO board replacing the ATmega328p with the ATtiny1634 on the DIP socket.
…
-
I am trying to compile GVRET for the EVTVDue in order to use it with SavvyCAN. Some files were initially missing but I was able to get over that error using MCP2515 libraries (in addition to the ones …
-
The SAM does NOT have an MCP2515
But if you look in https://github.com/macchina/arduino-boards-sam/tree/master/sam/libraries
...you will notice the inclusion of the MCP2515 library
I guess this was…
-
Hello,
Found these CAN bus transceivers on eBay ([SN65HVD230](http://www.ti.com/lit/ds/symlink/sn65hvd230.pdf)). Will they work with this NMEA200 library?
Thanks,
Michael
-
Здравствуйте, у меня ничего не принимает и не отправляет в мерседес w220 по 83.333... Дело точно не в подключении, с библиотекой mcp_can.h все прекрасно работает, а вот ваша библиотека молчит, то есть…
-
Hi,
iam new to using the M2 to tinker around with my 2016 Skoda Octavia III and wanted to get M2RET running on my M2 with SavvyCAN at first.
I've installed the newest Arduino Software and also insta…
-
SPI -> CAN
MCP2515 is a SPI to CAN protocol converter
MCP2561 is a CAN transceiver