-
Low FPS Issue on Galaxy S9 with scrcpy After Restart
Device: Samsung Galaxy S9
OS: Android 10
Setup: Samsung DeX, scrcpy (USB/TCP), USB debugging, rooted device
Issue:
After restarting or shu…
-
### Describe the bug
Hello,
I have two Tesla Model Ys and two Tesla TWC3s. The control runs via the new function of the BLE Proxy.
If one Vehicles has reached its Car Charging Limit in PV Mode, the…
-
In various places throughout the code, an apparent power is computed using an assumed line voltage of 240V. Seems like line voltage is not always constant. Also, is there any evidence that the power f…
-
Device: pixel 7 Pro
GOS Version: Latest by issue date (202408600
Issue:
When connecting this device to powerbank/charged ssupporting PD/QC, device tends to conenct-disconnect multiple times in a …
-
Any ideas appreciated
Thanks
-
Is this limited to the 7885 (apart from the gpio buttons) ? I'm trying to boot mainline on my s6 edge which has the 7420. Thanks.
-
The project seams quite mature to be used to measure environmental sensors. I would like to adapt it to be used with ESPs (ESP8266 & ESP32) as these provide a WiFi and Bluetooth interface. Has any wor…
-
With later firmware versions (>2017) of the infini-/mpp-solar 10+15kw inverters, full bms support was implemented.
Only supported BMS I'm aware of is pylontech via RS485 bus. You need a extra modbus-…
-
### Describe the bug
After plug in the car and start charging the soc is pulled from mqtt. EVCC gives me the error that the soc is invalid.
But in mqtt it is a plain number. here the mqtt broker inf…
-
### Describe the bug
Very often is value of the current on Slave Invertor shoots to value 6400Amps.
![sensor solax_pm_i2_battery_current_charge](https://github.com/wills106/homeassistant-solax-modb…