-
### PROBLEM DESCRIPTION
I am using the ShutterMode3.
This means one pulse for start and one pulse for stop (or power off if door has reached end position).
The relais is triggered fine if I c…
-
### Description
Hey all.
Recently, through Crashlytics, we started to notice a decrease in Crash Free Users % in our Android app. In iOS it stayed around 99%, but in Android dropped from 98%-99%…
-
### Describe the bug
The react-native-mmkv native module is not being installed with auto-linking on Bare RN Project
### Steps
1. Follow the steps described [here](https://github.com/coinbase…
-
### PROBLEM DESCRIPTION
Tasmota 12.5.0.4 does not switch the ap after Ap 0.
Both APs are configured in the Tasmota and in the router.
### REQUESTED INFORMATION
_Make sure your have performe…
-
### The problem
I have a tasmotized RGB Tuya LED (no separate white channel).
The Tasmota integration defaults to attributing
```
supported_color_modes: hs
color_mode: hs
```
to the auto…
-
The app always crashes when I click on Join Meeting button. The surprising thing it crashes only on the first run (when i do flutter clean and run the app). After the first run it works fine. But, it …
-
### Description
Update RN version 0.68.5 to 0.71.7
https://react-native-community.github.io/upgrade-helper/?from=0.68.5&to=0.71.7
Carsh when i close RN page, error:
FATAL EXCEPTION: mqt_na…
-
Same app was working fine with hermes engine enabled with RN 61.5 with multidex enabled .
```
2020-04-30 00:02:11.972 27777-27857/? A/libc: Fatal signal 11 (SIGSEGV), code 1 (SEGV_MAPERR), fault …
-
### PROBLEM DESCRIPTION
_A clear and concise description of what the problem is._
Influx DB always yields an IPv6 address (after about 30seconds) if the influx server is set as a hostname using …
-
### PROBLEM DESCRIPTION
_A clear and concise description of what the problem is._
I made a weather station with ESP8266 equipped with BME280, pulse anemometer, analog wind direction sensor and s…