-
The spec says (v1.1 4.1.4.5 ISR status capability):
The VIRTIO_PCI_CAP_ISR_CFG capability refers to at least a single byte, which contains the 8bit ISR
status field to be used for INT#x interrupt…
-
the PCI Capability Register is required for #149 virtio-over-pci idk why since most other devices use hardcoded BAR's
but if virtio needs it then other devices/drivers may also need such too
not…
-
For some reason Ubuntu kernel `5.3.0-53-generic` in Ubuntu 18.04 does not have `uio_pci_generic` module available by default:
```
root@ovs-afxdp:~# sudo modprobe uio_pci_generic
modprobe: FATAL: Mo…
-
Summary of status for resurrecting the PCI synthetic diagnostic for DIII-D helicon case.
@cornwalllau placed the most recent runs for here at NERSC ...
```
/global/project/projectdirs/m77/Lau
``…
-
```
So that we can assign io port space to PCI devices which are not inited by BIOS
for us
```
Original issue reported on code.google.com by `dmitry.zavalishin@gmail.com` on 15 Jun 2010 at 8:55
-
Each controller plugin can be associated with a vendor ID (or list of vendor IDs), and we can search through /sys/bus/pci for these vendor IDs and automatically load the correct controller plugin
-
*ansonl:*
- Device problem occurs on Netgear R7800
- Software versions OpenWRT 21.02.1 r16325-88151b8303
- Steps to reproduce
1. Set radio0 (5ghz) channel to any channel that is not 40 or 153…
-
I would love support for my [Supermicro X7DBU](http://www.supermicro.com/products/motherboard/xeon1333/5000P/X7DBU.cfm) (Super IO: [Winbond W83627HF/F/HG/G](https://media.digikey.com/pdf/Data%20Sheets…
-
Great project! I'm trying to get my older gaming laptop working to use as a development machine. After setting it up I've found the fans to spin way too loudly so I poked around and happily found yo…
-
When I run `lte up` I see the following output.
```
This script must be run as root, elevating!
lte.sh: manage xmm7360-pci
APN: your.apn.here
Script: /home/jacob/Desktop/xmm7360-pci/scripts/lte.s…