-
I read your wiki/blog.
As future step in stead of the CC1101 you could also use the very popular RFM69.
In the jeelabs eco system there are various OOK decoders. It might be worthwhile to take a loo…
-
In development currently.
This is, lets say "inspired by" someone else's work, found here;
https://forum.xda-developers.com/android-auto/android-head-units/joying-2gb-steering-wheel-key-t3543390
…
-
Anyone tried to use this lib with Si5351? If so, pls share a code to encode/transmitt FT8. Thx in advance.
-
When I use the I/Q swap setting (IF from Elecraft K3), I can see that USB and LSB seem to work as expected (for example, USB for 20m ham band) but CW appears to switch to lower side band (it is upper …
-
Would appreciate some help - am seeing a segmentation fault using the homebrew install process.
Could this related to the UHD library in /opt/homebrew/lib/SoapySDR/modules0.8/libuhdSupport.so being…
-
Plug it in while it's on.
Just FYI, I said "mode 16" "mode 0"
```
id View device identification.
reboot Reboot board.
shutdown Shutdown; Shuts down the console, too.
isp …
-
AFC would be an extremely valuable feature (which also to my knowledge no other OSS SDR RX software has)
AFC analyzes the signal which is currently within the filter band and adjusts the frequency is …
-
In function: **mesh_packet_set_local_addr**
```
uint32_t mesh_packet_set_local_addr(mesh_packet_t* p_packet)
{
#ifdef SOFTDEVICE_PRESENT
ble_gap_addr_t my_addr;
uint32_t error_code = …
-
### Feature Description
In order to create MPX audio to feed a FM broadcast transmitter the audio hardware needs to run at a sample rate of 192kHz to be able of including RDS and SCA. For creatin…
-
Hello, I want to connect QLog v0.39.0 with Omnirig v2.1 to my Xiegu G90.
Operation System is Windows 10.
I started Omnirig before QLog, as you mentioned in another Issue.
I can change the mode …