-
https://github.com/Lora-net/LoRaMac-node/blob/87f19e84ae2fc4af72af9567fe722386de6ce9f4/src/radio/sx1276/sx1276.c#L1550
According to the datasheet, the rssi should be calculated as:
when SNR >=…
44670 updated
4 years ago
-
**ATTENTION** !
- Use this form to report bugs in released SoftRF firmware, hardware and web pages only ;
- Issue reports from anonymous users will be most likely invalidated. Reasons for that ar…
-
**Heltec LoRa Node L151**
- features a STM32L151CCU6 + SX1276
==> initial support at https://github.com/fthiebolt/LoRa-boards-stm32duino
Bonjour Frederic,
After having added support to BSFran…
-
Hi, and thanks for the LoRa library. it can works with ATtiny13 / 45 / 85 ?
Thanks.
Sn0ff updated
4 years ago
-
**Describe your question or issue**
Potentially related to issue #563, I am getting errors with chirpstack about an invalid MIC calculation from my device using MCCI Arduino LMIC.
```
time="2020-…
-
Hi, I've been having issues for some while where the OTAA join request does not initiate a join accept. I've tested various things and at this point I'm uncertain what kind of parameters can be tweake…
-
Hello!
I am scratching my head around this now.
**Board:**
LILYGO® TTGO LORA V1.3 868Mhz ESP32 Chip SX1276 Module 0.96 Inch OLED Screen WIFI And Bluetooth Development Board
**Setup:**
OS: D…
-
You mention Semtech datasheet, http://www.semtech.com/images/datasheet/sx1276.pdf in LoRaSimpleNode in examples, gut the link does not work.
-
### Problem description
The Semtech sx1276 driver currently selects the incomplete loramac-node module to be built with it. This is unnecessary as users might wish to use just the driver without th…
-
Hi Cyberman,
first of all: Thanks for the great project!
I found a little issue with the TTGO V1 hardware, which results in a non working LMIC. The DIO2 pin is wired to pin 32 of the ESP on my TT…