-
Hello, I'm trying to use your library to play two scores simultaneously on my Nano via piezo buzzers for a circuit on my graduation cap. I was reading the header for the pin definitions and I was wond…
-
### Description
Hello all, I am currently upgrading my project from an Arduino Nano to a Nano 33 IoT board, which is supposed to be just a drop in replacement. I am testing it currently, and this l…
-
Arduino Nano 33 IoT (Arm® Cortex®-M0 32-bit SAMD21) support requested due to identical issues with Nano 33 BLE while using the onboard WiFi/BLE (u-blox NINA-W10) -> interrupt issues with standard meth…
-
**Describe the bug**
A clear description of what the bug is.
**Hardware and software used**
- Library version: [eg: 1.5.1]
- Arduino core: [eg: SAMD v1.8.13]
- Enviroment/IDE: [Arduino IDE or…
-
Standard pin names as `D10` are unknown for the Nano RP2040.
- Arduino IDE 2.3.2
- Arduino Mbed OS Nano Boards 4.1.5
- FQBN: `FQBN: arduino:mbed_nano:nanorp2040connect`
```
loading library …
-
https://store.arduino.cc/usa/nano-33-iot
The Arduino Nano 33 IoT is a low-cost Arduino board with a SAMD21 host processor and U-Blox NINA modem. The firmware is [custom](https://github.com/arduino/…
-
I was trying to connect PZEM004 to Arduino nano 33 IoT board, and this library is using SofwareSerial.h,
I tried to dig deeper, and Nano 33 IoT does not use SoftwareSerial anymore, so I'm not sure ho…
-
Hi,
i am making a little stream deck. I use 3 potenziometer 10K linear.
Arduino nano 33 IOT - connected beetween 3.3v and gnd.
The exist value of potenziometer are very unstable. I tried both USBMI…
-
Hi!
Apparently I'm facing an issue which is more interesting and hard than my capabilities.
When using `Arduino_JSON` vers 0.2.0 and `Arduino_LSM6DS3` 1.0.2 I find an interesting issue in dealing …
-
Hallo,
The new Arduino Nano’s (Every, 33 IoT, 33 BLE and 33 BLE Sense) are using new MCU’s and are not compadeble with the current ITEADLIB_Arduino_Nextion library. Will there be an update anytime so…