-
Hi,
I noticed that the gnuplot packaged with irap does not support png.
The command ```set term``` shows this:
Available terminal types:
canvas HTML Canvas object
…
-
Software looks to be the one I need but, after I installed and run it, it only performs a few movements and then it stops while the laser remains on. I have to reset to make it work again but again, o…
-
Still often have users with issues with files coming from Corel
ghost updated
7 years ago
-
Obviously we don't want to spend £100s on latest Corel draw suite, but we can get a cheaper version?
http://www.amazon.co.uk/Corel-Draw-Select-Edition/dp/B000ASAVM4/ (really cut down version -- w…
-
At #makernight last night we couldn't use the vinyl cutter because Gerald was in use and so there wasn't a computer set up for it.
We tried getting a printer driver for it set up on Jackie's laptop, …
-
@goatchurchprime has freed up a spare PC in sorting out the Arcitype mill (although he's going to double-check it is available for us to reuse, and that there's nothing important on the hard disk befo…
-
@jorgerobles Are there any controllers which use mm/s for F instead of mm/min?
-
I use an Epilog laser cutter, and that requires the lines to be "hairline" (to use the term from Corel).
I think the line width needs to be 0.002 mm to make the laser cutter understand that it needs t…
-
```
Hi,
I know you love my bug posts. Here's another.
I just modeled and cut a 2"x3"x3" box and exported the SVG into Illustrator.
The sizes looked good, but the notches on the short sides are all a l…
-
I ran into a couple of problems withe the Inkscape plugin under Windows (XP). I've included the version I hacked to make it work (FWIW, as I've never programmed in python before):
- When the correspo…