-
Hi,
i'm executing a the commands below to connect to Cortex-M55 however I was not successful:
response_1 = jlink.exec_command('CORESIGHT_AddAP = Index=4 Type=AHB-AP Addr=0x00300000')
respon…
-
When updating a petalinux environment via `petalinux-config --get-hw-description .` I get an IndexError at your scripts in the post-process phase.
I added some smaller print statements inside the fil…
-
Hi, I'm not 100% sure if this is the correct place for the specific issue we're running into. My knowledge of BTI is very limited, so I can't say that it's not the kernel module code causing this.
…
-
I try to flash or mergehex ble_app_blinky_nrf52840_mdk_s140.hex or ble_app_hrs_nrf52840_mdk_s140.hex, it's failed.
`mergehex -m s140_nrf52_7.0.1_softdevice.hex ble_app_blinky_nrf52840_mdk_s140.hex …
-
I'm currently doing some experiments with a iMX RT1176 SoC. The debug architecture doesn't have much documentation, but by putting together all the pieces of information I think it is organised more o…
-
### Is your feature request related to a problem? Please describe.
Currently, Nuttx provides a basic perf support interface, as shown below:
``` c
/*************************************************…
-
According to the TRM(`lm80-p0436-100_d_snapdragon_410e_apq8016e_tech_reference_manual_revd.pdf`, page 3357), msm8916 supports NIDnT(Narrow Interface for Debug and Test) feature, implemented in a QDSD(…
-
Hello Himax Team.
My image is larger than 1MB and I thought about using SWD to flash the image. Sadly I get errors like these
```
connect
self._idr = self.read_idr()
^^^^^^^…
-
In the `2024-10-16` build of the RP2350 Datasheet, under [Section 2.1.3 Atomic Register Access](https://datasheets.raspberrypi.com/rp2350/rp2350-datasheet.pdf#2.1.3.%20Atomic%20Register%20Access) ther…
-
Hi,
struggling with flashing nRF5340.
If I flash it manually with J-Flash Lite, first NET then APP core, it works fine.
I need to flash both cores with no reset between them, NET and APP respecti…
vpmdt updated
1 month ago