-
When attempting to connect to waveform records with the PVA backend, we get a type error:
```
NotConnected:
manta_async: NotConnected:
drv: NotConnected:
nd_attributes_file: TypeEr…
-
### Describe the feature and motivation
OpenCV needs generic standards-compliant drivers for "GigE Vision" and "USB3 Vision" compliant cameras.
GigE Vision and USB3 Vision are industry standards…
-
**Running ```arv-tool-0.8 -d all``` gives following output:**
```
[14:01:02.472] 🅸 interface> Found 0 USB3Vision device (among 7 USB devices)
[14:01:02.473] 🅸 interface> [GvDiscoverSocket::new] Add…
-
**Describe the bug**
Hi i installed Aravis 0.8 according to installation(meson) and everything installed fine but when i run `/usr/local/bin# ./arv-tool-0.8` i encountered `No device found` ( i set …
-
Current support for GigE camera parameters is very limited. The basic parameters (gain, exposure, FPS, etc) should be supported.
-
Our GigE camera has different modes: `Mono8`, `Mono16` and `Bayer`. Currently we are receiving raw images in `Mono8` mode and decoding them with a YARP bayer carrier, but it might me a better idea to …
-
### Issue description
ROS2 Frame rate is not same with Pylon Viewer for USB Basler Camera. As a default I can get max frame rate within Pylon Viewer. When I use ROS2 , I could not grab max frame ra…
-
Hi, would like to know does this driver compatible with the mentioned Blackfly S GigE or Grasshopper3 GigE Vision camera in either ROS Melodic or ROS Noetic?
Thanks and looking forward to hear from…
-
Hi Akram! My name is Dario and i'm using GTS version 0.4.4 installed in Windows. Recently installed over a 0.0.1 version we were using.
When in a new workbench, in the attempt of adding a first camer…
-
### Describe what you want to implement and what the issue & the steps to reproduce it are:
I noticed that the `temperature` field of the `/basler/current_params` topic is always 0.0.
After some inv…