-
Actual code provide basic low level sniffer for (PCD/PICC) ISO/IEC 14443A when using dnfc2 => sniff command
`T_SNIFF (Test special sniffer ST25R3916 MCU_CLK(PA5) and CSI CSO)`
It requires a Logic An…
-
Same as BusPirate and HydraBus do support.
Transparently bridging USB & USART (maybe with some escape seq to quit the mode or just reboot pm3).
It would allow sending easily `AT+` from host and also…
-
See commit [7ddfa04](https://github.com/hydrabus/hydrafw_hydranfc_shield_v2/commit/7ddfa04c92705aa2229dc46351a828d1703788fa)
1) Modify BBIO_NFC_CMD_SEND_BITS to use a generic command to send bits as …
-
It would be great to be able to define aliases for certain recurring commands, like "`alias atr = ]%%[read:33`" for smartcards or something like that.
Aliases could be loaded from the MMC in the fo…
-
Remove the usage of Python to build the version (from GitHub Tag) and build DFU for STM32F405
=> https://github.com/hydrabus/hydrafw/tree/master/src/build-scripts
1) Remove hydrafw-revision.py / h…
-
Todo fix the CI/CD error
https://github.com/hydrabus/hydrafw/actions/runs/8603212358/job/23574579221
-
I am encountering an issue with the Hydrabus device when trying to use UART bridge mode. Specifically, I am unable to connect to the device using WebSerial via a browser. The connection attempt fails …
-
Is there a reason why gcc-arm-none-eabi is kept locked to a 10-year-old version?
I upgraded it locally with good success, however i didn't try all the protocols.
-
#160 started to implement a *read with timeout* feature for smartcard mode.
This feature seems very interesting, but would require additional work in order to be applicable to all modes.
As of n…
-
Hi bvernoux
Can you add firmware later x8 and x16 nand support (I read about nand support somewhere in web for this board)? And also add 1-2-3 wire support would be good. I noob but trying MN101EF31G …