-
Setting up REM on a new board. Scanning bus 1 does not produce any results. Manually adding gives me errors
i2cdetect -y 1 gives this result
0 1 2 3 4 5 6 7 8 9 a b c d e f
00…
-
Depends upon both [rq_core Issue 79](https://github.com/billmania/roboquest_core/issues/79) and [rq_core Issue 85](https://github.com/billmania/roboquest_core/issues/85).
In order to use vendor-sup…
-
[rq_addons Issue 5](https://github.com/billmania/roboquest_addons/issues/5) depends on this Issue.
Currently, the I2C bus ID for both servoes and motors is hard-coded as a constant in rq_motors.py …
-
### Answers checklist.
- [X] I have read the documentation [ESP-IDF Programming Guide](https://docs.espressif.com/projects/esp-idf/en/latest/) and the issue is not addressed there.
- [X] I have updat…
-
Missing mapping for sensor HIMX1092 for ( `root/drivers/media/pci/intel/ipu-bridge.c`):
```
ls /sys/bus/i2c/devices
i2c-0 i2c-1 i2c-10 i2c-11 i2c-12 i2c-13 i2c-14 i2c-15 i2c-16 i2c-17 …
-
程序编译下载完后的串口信息为
```c
22:38:59.682 -> D (88) ESP_Panel: Begin IO expander
22:38:59.682 -> D (92) ESP_Panel: Begin LCD
22:38:59.682 -> D (94) ESP_PanelBus_SPI: Create panel io @0x3fcecc70
22:38:59.6…
-
I wonder how useful would it be to add a bus recovery mechanism to the software I2C implementation. It would be something similar to what is discussed here: https://github.com/esp8266/Arduino/issues/1…
-
**Hello everyone, I am a staff member of GEPRC. Long ago, we found that there is no integrated barometer in the FC launched by some brands, which has no impact on the firmware of Betaflight. However, …
-
Hi!
Tried your battery component on my dev board but it just crashes.
Board: SparkFun Thing Plus - ESP32-C6
My config:
```
i2c:
sda: GPIO6
scl: GPIO7
external_components:
- source…
-
MOS currently has separate sets of I/O API calls for files, UART1, and i2c. they all support very similar APIs, performing very similar functions.
It would make sense to support unified I/O, allow…