-
Hi,
people using Kotori reported this error message to us:
```log
2021-11-20T20:25:51.019107+0100 [kotori.daq.services.mig ] DEBUG : Processing message on topic 'workbench/testdrive/…
amotl updated
10 months ago
-
@RuiPinto96 just asked over at https://github.com/daq-tools/kotori/issues/5#issuecomment-496241658:
> Hello there again!!
Just asking a question: Do you have packages for Centos 7?
I'm trying to …
amotl updated
2 years ago
-
Hi there,
@danb35 is currently into:
> Now to figure out how to tell [mpp-solar](https://github.com/jblance/mpp-solar) how to send data in a format Kotori will read.
With kind regards,
Andre…
amotl updated
3 years ago
-
Dear Jeremiah and Michael,
thanks a stack for conceiving the excellent PyInfluxQL package the other day.
We are using it within [Kotori](https://getkotori.org/) [1] since quite a while but never…
amotl updated
3 years ago
-
## Introduction
Coming from GH-108 and https://github.com/daq-tools/kotori/issues/69#issuecomment-1847991685, this issue is about unlocking support for devices by manufacturer [Shelly](https://www.…
amotl updated
10 months ago
-
## About
Based on my thoughts shared at GH-132, I am trying to generalize a few new requirements around data acquisition from TTN into another design principle of Kotori. On this matter, I am think…
-
Dear @jpmens, @ckrey, @linusg and all other OwnTracks fans,
through [1], I found out just the other day that more data can be added to the OwnTracks telemetry payload than just location information…
amotl updated
4 years ago
-
Hello,
I've searched the documentation but I didn't find nothing about this. In my case, I've a telemetry source that sends local data stored for a period of time, so each message includes several …
-
Hello!!
I'm trying to connect with Kotori to Mosquitto through authentication and i'm not able to connect.
It gives me: Error connecting to MQTT broker but retrying each 5 seconds
I enabled the a…
-
Together with @adrianlzt, we discussed the option to send metrics to InfluxDB using UDP for high frequency data acquisition within #28.