-
lilygo t display s3 support would a good addition to supported devices list
-
Hi, everyone! Could you guys please add psbt via microSD functionality?
Soldered T-Display [K198] could be easily hooked up with some jumper wires to commonly used Micro SD (TF) Storage Board (SKU:…
-
I am trying to connect a keyboard to the LilyGO T-Display-S3 AMOLED as an input device using USB Host mode. However, I am encountering the following issues:
1. The USB DM and USB DP pins, which are…
-
### Board
lilygo t-display s3 touch esp32s3
### Device Description
3.1.0-RC1 is working just fine but when moving to 3.1.0-RC2 the micro controller go into Constant reboots
lilygo display t3 tou…
-
Hi,
I was able to successfully build und flash an ESP32-S3 with octal-SPIRAM, but I am not able to connect to the board after flashing the firmware. I think I am missing something, but maybe the sp…
-
Hi, I have a project Micropython 1.23/esp-idf-v5.2 /s3lcd where I randomly get the following error on calling init() for s3lcd.ESPLCD object. The configuration I use (tft_config.py) is the recommended…
-
When I use the following code to put my LilyGo T-Display S3 into deep sleep, my meter is showing 6.4 mA of current draw using the onboard button as a GPIO wake up. I was expecting much less. Am I mi…
-
Hello! I apologize for interrupting you. I have a question that I would like to ask for your help. I am developing a device using your code, and I have encountered a problem. The specific problem is t…
-
The t-display is fairly new and has some potential. Didn't know if you were going to look into this device. Unfortunately I'm more an operator and trying to learn microcontroller programming.
-
I am able to flash my new device to 1.6.3. It starts well. When trying 1.6.4 / 1.7.0 I see blank screen only. Is it known problem?