-
Many Padauk-µC are available in 14-pin SOIC footprint.
The following are both available at LCSC and supported by easypdkprog:
PFS154-S14
PFS173-S14
PMS154B-S14
PMS154C-S14
-
Hi jjflash65 can this program pms150c
-
Hello .
Do you have a code to use EEprom 24c08 with padauk?
-
The U06 devices have a smaller footprint.
The PMS150C-U06 is available at LCSC and supported by easypdkprog.
The PMS15A-U06, PMS154C-U05, PMS154B-U06 are further devices supported by easypdkprog.
-
Many Padauk µC are available in 14-pin SOIC packages. It would make sense to have a matching board.
-
When flashing the .ihx file provided in this repo, the helloworld example works,
but when I compile it from source code using the SDCC snapshot, it doesn't.
Actually I couldn't get any of the showca…
-
Hi,
Thanks for adding PFC232 support
Finally i got some time to play with this MCU and i run into some issue.
**Describe the bug**
Getting verify failed error when flashing PFC232
And on latest…
-
I've noticed two things so far that are less than ideal when using easypdkprog connected to a flash based IC that is on a board with various other components. I am curious if either of these can be s…
-
@spth , @serisman
It appears there is something broken in SDCC4.4.0
The Serial_HelloWorld example compiles&programs without warnings, but when I run it, there is no output from the serial monit…
-
I ordered and assembled your programmer and it works perfectly!
But not I'm having difficulty to find a method of thanking you, short of opening an issue.
Once this whole pandemic is over I would …