-
Hi jjflash65 can this program pms150c
-
The U06 devices have a smaller footprint.
The PMS150C-U06 is available at LCSC and supported by easypdkprog.
The PMS15A-U06, PMS154C-U05, PMS154B-U06 are further devices supported by easypdkprog.
-
--- ./fppa-pdk-tools/cpuvariant/pmx150.c 2021-02-07 17:51:08.464264736 +0800
+++ pmx150.c 2021-02-07 18:19:26.728133987 +0800
@@ -87,6 +87,7 @@
case 0x10: if(bit
-
PMS150G support?
-
I made pcb , replaced buzzer with led since i don't have buzzers without generator
And it doesn't work,
tested also with PMS150C-S08 on breadboard and it doesn't work.
I have tested with PFS154 on…
-
I compiled the source code to generate "easypdkprog.exe" and "easypdkprogtest.exe" but these two always show "No programmer found" in case the release here work fine _"https://github.com/free-pdk/easy…
-
Today, Padauk released version 0.00 of the PMS150G datasheet.
Since this device seems to be another low-end device, very similar to the PMS150C, it wil probably become quite popular; so it would be…
-
Commenting `engint` build the projects but interrupt doesn't work.
-
```
#include "extern.h"
void FPPA0 (void)
{
.ADJUST_IC SYSCLK=IHRC/4 // SYSCLK=IHRC/4
PA = 0b_0000_0000; // Port A Data register
PAC = 0b_1111_1111; // Port A Control register, 0/1: inp…
-
A while ago, Padauk released the PMS15A. It would be good to have support for it.
While LCSC currently does not stock it (I guess no one asked them for it so far), other vendors supply it.
The P…